Tuesday, 7 January 2014

Rag Rugging

I recently redecorated my bedroom, with the intention of eliminating the angsty teenager and leaving my parents with a usable room when I eventually get to move out. The 20+ year old carpet was finally removed (although some of it still lingers in the boot of my car) and replaced with a lovely dark wood laminate. I already have one lovely rug, but I thought I'd draw on my love of history and make my own rag rug. I spend quite a lot of time on historic working narrow boats which traditionally have rag rugs in the back cabin, so I thought I would give it a go. A small amount of internet research later, and I was pretty sure that it would be a feasible project. Rag rugs only really need three basic things:

1. Sacking Hessian. I got mine from ebay for 99p, plus 99p postage and packaging. This was just a basic 73cm x 50cm potato storage sack, which I think you can get from places that stock garden supplies. I did look at a few ex-coffee sacks, and sacks with labels printed on them, with the intention of having the printed detail visible on the underneath of the sacking, but decided against it in the end, as these were much more expensive. I've also since realised that you wouldn't be able to see the majority of it anyway!

The underside of the rug so far

2. A latch hook. This is a tool specifically designed for rag rugging. It is possible to make the rug using a sharpened peg or similar home made implement, but a latch hook will make the task considerably easier. Again, I got mine from ebay, for £1.48 plus 75p p&p. Altogether, a reasonable amount spent on materials so far.

My ebay latch hook

3. Rags. The obvious element to a rag rug! Pretty much any leftover clothes or materials can be used, so long as they don't fray when they're cut up into strips. I wanted to make my rug to match my new room, so I wandered round the local charity shops finding clothes in the right colours. But it all depends how specific you want to be. These need to be cut down into strips about an inch wide, and three to four inches long. It doesn't have to be specific, the strands can be trimmed down again later.

My bag of rags

The actual rugging process is very simple.

1.Push the latch hook through a couple of rows of hessian fabric



2. Catch a strip of material in the hook



3. Pull the latch hook back through the hessian, making sure the flicky bit catches the material


Ta da!



Hemming the rug can be achieved by folding the edges under, and then just making sure you push your latch hook all the way through both layers of hessian. This achieves a hemmed effect without affecting the pattern of the rug.

That's about it really! Rag rugs can really appeal to your inner obsessive compulsive streak. They can be made from one end to the other, outside working in, randomly, pretty much any way you like. I started in the middle, then ended up going from end to end so I had a stripe down the middle.

Beginning the rug

First stripe completed
The rug so far - onto my second bag of scraps, so spot the colour change!

Be warned though, it is quite a slow and repetitive process, and takes a lot of rags. I tend to work on my rug whilst watching a film or television series. The end result is really soft and comfy though, and well worth the effort! Stay tuned for a photo of the finished product.

No comments:

Post a Comment